Shanghai Tangwei Toys Factory


Contact Us

How to Paint Vinyl Figures

Aug 31, 2017

If you wish to alter the appearance of your vinyl figures by coating them with paint, there are some important preparation techniques you will have to employ before you get started, or the figures will begin to shed paint relatively soon after application. Because vinyl is a non-porous, man-made surface, it is ill-suited for accepting paint. Before paint will stick to your figures, you will have to abrade them using a friction-based method. In addition, you must apply a undercoat of primer, or the paint will peel over time.

Wash your vinyl figures with soap. Scrub any grooves and crevices using a coarse sponge. Rinse the figures with a rag or under a faucet. Dry the vinyl figures using a clean towel.

Promote adhesion by scuffing the vinyl figures with a 220-grit sandpaper. Using scissors, cut the sandpaper into smaller pieces if necessary. Do not stop sanding until the vinyl figures feel rough.

Move the vinyl figures to a welll-ventilated area. Wear a respirator if you must work in an enclosed indoor area.

Place the figures on a drop cloth. Tape over the portions of the vinyl figures you do not want painted.

Spray a coat of acrylic spray primer onto the abraded vinyl figures. Hold the can of primer six to eight inches from the vinyl figures. Wait two hours for the primed vinyl figures to dry.

Apply acrylic paint to the primed vinyl figures using craft brushes.

Related Industry Knowledge
Figures Anime
Action Figures PVC
Figures Statues
Cartoon Figurines
Figurine Statues
Cartoon Toys Kids
Animal Toys
Contact information

No.898 Xiuwen Road, Building 5, Room 209, Minhang, Shanghai

Tel: 86-21-34681372

Copyright © Shanghai Tangwei Toys Factory All Rights Reserved.

Online customer service
Online customer service system